reference: https://www.raspberrypi.com/documentation/
Set up process
Raspberry provides an all in one tool called rpi-imager that also downloads the iso
You can flash a iso with a config option setting up wifi, so be able to ssh into it without a keyboard
Tips
You can run graphical aplications remotely if the compositor is already running by setting the env variable DISPLAY=:0
For running a browser fullscreen consider using FullPageOS
Displays
There is a pixel clock limit which means modes bigger than 1920x1200@60 are not supported.
Raspberry Pi zero 2
I/O
Micro HDMI
2 micro USB
Micro SD card reader
Notes
The hardware barely runs the desktop, both LXQT or labwc, it’s adviced to start it on tty mode.
Chromium and Firefox have a popup notifying that you have less than 1GB or RAM, in Chromium you can avoid it by adding --no-memcheck
Raspberry Pi 5
- Broadcom BCM2712 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU, with cryptography extensions, 512KB per-core L2 caches and a 2MB shared L3 cache
- VideoCore VII GPU, supporting OpenGL ES 3.1, Vulkan 1.2
- Dual 4Kp60 HDMI® display output with HDR support
- 4Kp60 HEVC decoder
- LPDDR4X-4267 SDRAM (2GB, 4GB, 8GB, and 16GB)
- Dual-band 802.11ac Wi-Fi®
- Bluetooth 5.0 / Bluetooth Low Energy (BLE)
- microSD card slot, with support for high-speed SDR104 mode
- 2 × USB 3.0 ports, supporting simultaneous 5Gbps operation
- 2 × USB 2.0 ports
- Gigabit Ethernet, with PoE+ support (requires separate PoE+ HAT)
- 2 × 4-lane MIPI camera/display transceivers
- PCIe 2.0 x1 interface for fast peripherals (requires separate M.2 HAT or other adapter)
- 5V/5A DC power via USB-C, with Power Delivery support
- Raspberry Pi standard 40-pin header
- Real-time clock (RTC), powered from external battery
- Power button
Notes
Careful with what charger you use for power, it need 3A minimum, recommended 5A
It termal throttles at 85ºC, to check tempterature vcgencmd measure_temp